What should Concern When Installing Indoor Playground Equipment?

Views: 358 Author: Site Editor Publish Time: Origin: Site

The installation of indoor playground equipment is directly related to the children's play experience and personal safety. If the amusement equipment is not installed properly or is not securely installed, it is prone to failures of one kind or another, which will not only discourage children's interest in play, but even threaten their personal safety.

Therefore, in the installation of indoor playground equipment, we must not be careless and perfunctory, we must strictly control. So, what precautions should be taken when installing indoor children's playground equipment?

First, we must install in strict accordance with the design drawings, but also flexible according to the actual situation. Indoor children's playgrounds are customized products, and all play equipment is produced and installed according to the design renderings. How to put the amusement equipment, how much space between various amusement equipment, etc., these are fixed on the design drawing. Therefore, if the design drawing is correct, the installation of amusement equipment needs to be carried out in strict accordance with the design drawing. However, we need to pay attention to the fact that designers can't do everything when designing. There may be some aspects of negligence. At this time, the installer should be flexible and make reasonable changes according to the actual situation of the site.

Indoor Baby Playground Equipment.jpg

Second, it is necessary to ensure both the local firmness and the overall firmness. During the installation of indoor children's playground equipment, we must not only ensure the normal operation of each amusement equipment, but also pay attention to the overall safety and robustness. When installing, the fasteners such as screws must be tightened, the joints between the two-amusement equipment must be fastened, and the bracket constructed by galvanized steel pipe must also be fixed. After installation, you can double check to see if there are any omissions. The best way is to experience all the amusement equipment one by one, and repair the unfixed places in time.

Thirdly, make sure there are no hard objects exposed. Children's self-protection consciousness is very weak, and their skin is extremely delicate, and they can scratch, touch or scratch the skin if they are not careful. Therefore, during installation, the hard or sharp parts of the amusement equipment must be wrapped with a tube to prevent children from being injured.

Fourth, avoid too wide gaps. During the installation of the indoor children's playground, between the two-amusement equipment, between the amusement equipment and the wall, between the amusement equipment and the bracket ... gaps will inevitably appear in these successive places. If the gap is too large, the child can easily fall into the gap and get stuck while playing. Therefore, be sure to avoid too wide a gap.

Fifth, the slope of amusement equipment with a slope should not be too large. There is a certain slope between the indoor play equipment for sale such as the rainbow ladder, slide, climbing frame and the ground. For children's amusement safety, these slopes are not easy to be too big, and children's amusement safety should be fully considered.

Sixth, protective net. Safety nets are an essential safety barrier in indoor children's playgrounds. Platforms on the second floor and above, the side of the Devil's Slide, around the trampoline, etc., need to be installed with protective nets. Therefore, it must not be missed during the installation, and at the same time, its robustness and safety must be ensured.

In addition to the above, the inspection after installation is equally important. We should check the indoor children's playground to see if all the amusement equipment is correctly installed, to see if all amusement equipment is safe and secure, and to see if there are any sharp objects left in the area.


Contact Us